EVX 30/32
PEEP valve

Ventilation with Positive End Expiratory Pressure can be used in many respiratory pathologies but also during rescue and trasportation.

Made of transparent polycarbonate (in the autoclavable version).
The special anchorage allows to position the PEEP valve on 360° to improve the operator's position.
The range goes from 0 to 10 cm H2O.
The PEEP valve complete of connection is available in the autoclavable and disposable versions.


EVX 30 autolavable with connection
Code EV60030C

EVX 32 disposable with connection
Code EV60032C

B-holder
Resuscitator holder

A small device, made of polyamide, will optimize the organization of space in ambulances, emergency rooms or in intensive care areas so to always have manual resuscitators ready at hand.
It can be hung on the wall and occupies a very small space.


B-holder
Code BG02000A

EVX 10/12/16
Non-rebreathing valve for expandable resuscitator

Made of polycarbonate and silicone membranes in the autoclavable version and in PVC in the disposable version.
The low resistance of nthe valve makes spontaneous breathing and exhalation during mechanic ventilation easier.
Standard ISO 15/22 mm connectors.

EVX 09/11/15
Non-rebreathing valve with pressure limit for expandable resuscitator

Different, because it has the possibility, when necessary, to active a pressure limit calibrated to 40 cm H2O, tha cah be selected or blocked on the valve.
Made of polycarbonate and silicone membranes in the autoclave version, and in PVC in the disposable one. Standard ISo 15/22 mm connections.


EVX 09 disposable
Code EV50009C

EVX 11 autoclave
Code EV50011C

EVX 15 disposable
Code EV50015C

EVX 13
Non-rebreathing valve for pateint circuit

Designed to equip Spencer lung ventilators, it is made of autoclavable polysulphone, and is characterized by low resistance guaranteeing high preformance.
Standard ISO 15/22 mm connections.


EVX 13
Code EV50013C

OX Valve/reservoir
Aspiration valve for oxygen and tank

The necessity of ventilating a patient with 100% oxygen and, at the same time saving on its consumption, can be done by using the oxygen aspiration valve in association with its tank.
This system is essential during ventilation in a polluted atmophere.
The valve is made of polycarbonate in the autoclavable version and PVC in the disposable one. The tank or reservoir is made of PVC.


OX Reservoir adult/paediatric
Code BG03091A

OX Reservoir infant
Code BG03092A